50mm Velvet Ribbon for Garment Trims: UAE Wholesale Guide

For UAE ateliers, uniform suppliers, costume makers and fashion retailers, ribbon selection is about more than colour. Width, roll length, shade consistency and the way a trim behaves during sewing all affect the finished piece. Al Bastaki Online’s 50 mm velvet ribbon, article NMA006-50MM, offers a broad, statement-scale trim in 10 metre rolls with 37 colour-coded variants.

This guide explains the verified product details, practical garment-trim applications and the checks UAE and GCC buyers should make before ordering. The focus is clothing construction and fashion sampling, distinct from narrow satin ribbon commonly sourced for gift wrapping.

Verified NMA006-50MM product details

The live Shopify catalogue lists the product as VELVET RIBBON:10MTR:2" (NMA006-50MM). The listing was reviewed on 17 September 2026 and showed the product as ACTIVE and inventory-tracked.

• Article number: NMA006-50MM
• Width: 50 mm / 2 inches
• Roll length: 10 metres
• Variants: 37 colour-coded options
• Recorded inventory: 3,700 units in total at the time of review
• Catalogue category: Garment Accessories > Ribbons > Velvet Ribbons
• Shopify origin tag: China

The catalogue does not state the fibre composition, pile construction, stretch, washability, colourfastness or heat tolerance. Buyers should not assume these properties. Request or purchase a sample roll and test it with the intended fabric, construction method and care process before approving production.

Colour codes and SKUs

Each option uses a 50 MM colour code and its own SKU. Representative examples include:

The complete range contains 37 codes. Use the exact colour code and SKU when requesting repeat stock; names such as “red” or “blue” can be too broad for reliable replenishment. Screen colour also varies by device, so physical approval remains important.

Where 50 mm velvet ribbon can work in garments

A 50 mm ribbon creates a wider visual band than narrow decorative ribbon. Depending on the sample results and garment design, it can be considered for:

• borders and bands on dresses, abayas, jackets or performance costumes;
• waist, belt and sash details;
• statement bows and removable garment accents;
• neckline, cuff or hem features where the pattern allows a 50 mm trim;
• fashion samples, window displays and coordinated retail presentation.

These are design possibilities, not guaranteed applications for every fabric. Weight, drape, seam bulk and care requirements should be evaluated on a prototype. For structured garments, buyers can also review the non-woven interlining wholesale guide; the interlining and trim should be tested together where both appear in the same area.

How to choose velvet ribbon for sampling and production

1. Confirm the finished width

NMA006-50MM is listed as 50 mm or 2 inches wide. Check the pattern, seam allowance and visible finished area before calculating requirements. A full-width surface band and a ribbon folded into a seam consume material differently.

2. Approve shade under real lighting

Compare the physical ribbon against the actual garment fabric under the lighting in which the product will be sold or worn. For uniforms, coordinated collections or repeat orders, retain an approved swatch labelled with the variant code and SKU.

3. Test direction and handling

Velvet-style surfaces can appear different when viewed or brushed in opposite directions. Keep the orientation consistent across cut pieces during sampling. Test the chosen needle, thread, stitch length, pressing method and edge treatment on offcuts before working on the garment. Do not apply high heat or steam unless testing confirms the product can tolerate it.

4. Calculate roll requirements carefully

Each roll is listed as 10 metres. Measure every application point, multiply by the production quantity, then add an allowance for sampling, joins, matching, cutting and quality control. The CM/inch measuring-tape guide offers practical measurement reminders for workshops.

Wholesale planning for UAE and GCC buyers

The 37-code range gives haberdashery retailers and fashion-supply businesses room to build a broader colour assortment, while the 10 metre format is practical for sampling and small-batch work. At the 17 September 2026 review, all 37 variants showed 100 units each, for 3,700 units in total. Inventory can change, so confirm the live quantity for the selected code before committing to a customer deadline.

The timing is also relevant for fashion teams preparing samples and sourcing trims ahead of the next Dubai Fashion Week, whose official site lists the upcoming season for 22–26 October 2026. Buyers working to event or collection deadlines should allow time for shade approval, sewing tests and any repeat-stock checks.

Order 50 mm velvet ribbon from Al Bastaki Online

Choose NMA006-50MM when your project calls for a wide velvet ribbon supplied in 10 metre rolls. Review the live product page for current colour codes and availability, or browse the wider Velvet Ribbons collection. For wholesale or repeat-production planning, quote the exact variant code and SKU when contacting Al Bastaki Online.