40-Inch Non-Woven Interlining: UAE Wholesale Tailoring Guide

Interlining is a behind-the-scenes tailoring material that can make a visible difference to the shape and finish of a garment. For UAE alteration shops, uniform makers, fashion studios and sewing-supply retailers, choosing the correct roll starts with verified dimensions and a clear understanding of the intended fabric and construction method.

Al Bastaki Wholesale carries INTERLINING;40″x25Y (22.86MTR), article 1035HF-AT/6201/25. The Shopify listing classifies it as non-woven interlining and records a 40-inch width, a 25-yard roll length and the metric equivalent of 22.86 metres. This guide explains how UAE and GCC buyers can evaluate that format for garment-production needs without making assumptions about properties that are not stated in the listing.

Verified product details

• Shopify product title: INTERLINING;40″x25Y (22.86MTR) (1035HF-AT/6201/25)
• Article number: 1035HF-AT/6201/25
• SKU: 1111154339111
• Classification: Non-Woven Interlinings
• Roll width: 40 inches
• Roll length: 25 yards (22.86 metres)
• Listed origin tag: Taiwan
• Variants: One listed variant

The catalogue does not state the fibre composition, weight, colour, adhesive system, fusibility, care requirements or recommended application temperature. Buyers should confirm those points before committing the material to a production run.

What interlining does in garment construction

Interlining is placed between garment layers to add support where a single fabric layer may not provide the required structure. Depending on the selected material and construction method, it may be considered for areas such as collars, cuffs, waistbands, plackets, facings and other shaped details.

The right choice should support the design without making the finished garment unnecessarily stiff. A lightweight fashion fabric, a uniform shirting and a structured outerwear fabric can require very different behaviour, even when the pattern pieces look similar.

Common workshop applications to evaluate

• Supporting collars and collar stands
• Reinforcing cuffs, plackets and button areas
• Adding shape to waistbands, facings and pocket openings
• Stabilising selected panels or decorative details
• Preparing samples for uniforms, modest fashion and made-to-measure garments

These are general garment-construction applications, not a claim that every application suits this specific article. Always test article 1035HF-AT/6201/25 with the actual shell fabric and planned attachment process.

How to select non-woven interlining for a project

1. Start with the finished hand and drape

Decide how the garment should feel and move after construction. A crisp collar may need more support than a soft facing. Compare a test piece against the untreated fabric, then assess both the appearance and the hand after sewing.

2. Confirm the attachment method

Do not assume that an interlining is fusible simply because it is non-woven. Check whether the article is intended for fusing, sewing or another method. If heat or pressure will be used, confirm the required settings and verify that the main fabric can tolerate them.

3. Make a production sample

Apply or sew a small sample using the same fabric, thread, seam allowances and equipment planned for the order. Check for bubbling, distortion, strike-through, colour change, excessive stiffness and edge impressions. Allow fused samples to cool fully before evaluation.

4. Test the intended care process

A sample should be washed, pressed or dry-cleaned according to the garment’s intended care route. Recheck adhesion, shrinkage, shape and surface appearance. This is especially important for uniforms and repeat orders where consistent results matter.

Planning roll usage for wholesale orders

The verified 40-inch width and 25-yard length help buyers estimate coverage, but usable yield depends on pattern-piece dimensions, grain or directional requirements, defects, overlaps and cutting waste. Convert every marker to the same unit before calculating: 25 yards equals 22.86 metres.

For more reliable purchasing, record the average consumption per garment from a tested marker, add an agreed waste allowance, and keep sample results linked to the article number and incoming batch. Workshops can use the CM/inch measuring-tape guide when standardising measurements and the tailor’s chalk guide when planning accurate fabric-marking workflows.

Why the timing matters for UAE fashion buyers

Dubai’s fashion calendar keeps sourcing and sampling relevant for local studios and suppliers. The official Dubai Fashion Week website lists its upcoming season for 22–26 October 2026. For production teams preparing samples or replenishing core tailoring materials, early compatibility testing can reduce last-minute substitutions and help maintain a consistent finish across an order.

A practical buyer checklist

• Match the interlining to the exact shell fabric and garment area.
• Confirm composition, weight, colour and attachment method with the supplier.
• Test heat, pressure and dwell time only if fusing is confirmed.
• Evaluate drape, surface appearance and recovery after cooling.
• Test the planned garment-care process.
• Calculate consumption from a production-ready marker.
• Record the article number, SKU and batch used for repeatability.

Source 40-inch interlining in the UAE

For tailoring workshops, uniform producers, fashion studios and sewing-supply retailers, article 1035HF-AT/6201/25 provides a clearly listed 40-inch × 25-yard roll format. View the verified non-woven interlining product and contact Al Bastaki Wholesale to confirm technical suitability, current availability and ordering requirements for your project.